Normally it will take around 30 days to finish production after the down payment is confirmed. It will take around 30 days to 35 days to ship from China to […]
How do I finish an unfinished register?
Sand all surfaces lightly with fine grit sandpaper. Do not use steel wool as it tends to shed fibres that stick to the grain and ruin a smooth finish. Stain […]
What materials are used for a floor register?
The art of building a good floor register comes from physics. Because of the added control and the location, wall and floor registers are subjected to a constant change in […]
Regarding wood flush mount floor registers, can they be used after my floor has been installed?
No, flush mount registers should be installed at the same time as your hardwood floor is installed. They have grooves on the outside of frame, so they must be jointed […]
What is the difference between wall register and floor registers?
Floor registers can support the weight of a person while a wall register cannot. The damper operator on a floor register is almost flush with the floor while a wall […]
How to Measure for Replacement Registers or Grilles?
1. Note if the register or grille you are replacing is for a wall, ceiling or floor. 2. Remove screws holding the vent in place. If the vent is held […]
What is the difference between register and grille?
Registers and grilles are louvered or slatted grates that cover an opening in a floor, wall or ceiling through which air passes into or out of a room. Registers […]
What is a return vent?
An intake vent in which the air goes back to the air handler,Air flow is out of the room.
What is a supply vent?
A vent in which the air is coming into the room through the wall, ceiling, or floor.
What is a damper?
A device on a vent or in ductwork that regulates the airflow into a room. It can be either a handle on the face of the grille or a gear […]